Gordon0652

iTrader: (4)

Hello,
Still building my LS7 440 engine seen in my sig. I will be using all my F-body pulley accessories set up and I am now looking for a water pump. If i buy pump "19180610" will that line up correctly with my belt?

http://paceperformance.com/i-6251476...-2010-ls7.html

For some reason I am thinking I have to but the stock LS1 F-body pump so it all lines up.

Thank You!

garys 68

iTrader: (1)

That pump is spaced for corvette accessories. The 98-02 f body accessories, crank pulley is about 3/4" farther out. You'll need the f body pump.

Gordon0652

iTrader: (4)

Thank you for the reply. Can the LS1 water pump work with an LS7 block? Hope it flows enough for this motor and can handle the RPMs.

garys 68

iTrader: (1)

Not sure if there's much of a difference in water pumps. Same pump used on 4.8 to 6.2 trucks. Lots of big cubic inch strokers using stock pumps.

Gordon0652

iTrader: (4)

Thank You Sir!

marc.madmax

iTrader: (2)

I don't know specifically the ls1 but I have a LS6 in a 04 CTS-V that I replaced the water pump from an 09 LS-7 with no material changes. I have converted the plumbing for the heater lines but that I know has no bearing on your questions.