_jacob_

Hello I am building a ls3 powered c10 and wanting to use this engine what is need to do this swap I have a 4l80e and know I need holly oil pan wanting to use MSD atomic EFI has anybody ever done this with this engine



Has any body ever use this and what is needed to complete and run this engine

slogo

Check out ls1truck and see if they can help you out.

_jacob_

Ok will do but what is needed to complete this engine

KW Baraka

iTrader: (7)

If you buy a drop-in GM crate engine, nothing would be needed to complete the ENGINE; it's as complete as you can get.

What you will need is the proper hardware to install the engine as well as vehicle-specific LS headers if you decide to go that route.

Best of luck!

KW

_jacob_

would the MSD atomic EFI



Be the computer ecm
and fuel rail

z28SSilvest

I have the 376/480 in my car. Ended up camming it with a Brian Tooley Stage IV and it made 481 with supporting mods. Runs great without any issues. Needed some conversion stuff though.

_jacob_

Ok I will be useing holly motor mounts, Oil pan,transmission crossmember,and Headers with about the fuel system