LS3 fbody problems
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Elizabeth City, NC
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
LS3 fbody problems
I finished my ls3 install last weekend with no problems. She started right up and worked beautifully for a day. The first time I actually got on it about 100 miles later she died and wouldn't start again afterwards. Everything seems to work fine electrically and I checked all my fuses, but I'm not getting any power to to cam or crank sensors. I don't know if maybe I shook something loose, but I checked out everything I could think of. It will turn over fine but won't start.
#2
Teching In
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Elizabeth City, NC
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Ok so today I went and tried to start it and it started right up. I don't know what the deal is I didn't do anything to it. The fuel pump definately needs replaced though.
#4
Teching In
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Elizabeth City, NC
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, but this week a racetronix kit is going in.
I am using a lingenfelter converter box and it wasn't getting power, then the next day it was. I didn't see any blown fuses or anything that would cause that. A bad ground maybe?
I am using a lingenfelter converter box and it wasn't getting power, then the next day it was. I didn't see any blown fuses or anything that would cause that. A bad ground maybe?
Last edited by fbam; 04-18-2009 at 03:17 PM.