head porting in so cal? and how about this combo?
#1
head porting in so cal? and how about this combo?
any one know of a good shop that can port my l92 heads in the orange county or riverside area? and wat do u guys think of this setup? i know this is very common but just wanted to ask since im posting lol
lq4 block
stock crank, rods, and pistons (got the crank polished and all from the shop i got the block at)
new rings
new bearings (rod,main,cam)
arp rod bolts and got them resized
ported l92 heads(still stock but im trying to)
ported fast 102 intake
fast throttle body
cam 230/234 and .610 lift
built t56
stock 10 bolt
i want to do a procharger maybe around 5-8 psi???
and this will all go on a 02 z28
can u guys please recommend things and advise if anything should be diffrent? and this is my first post so sorry if i made any mistakes.
lq4 block
stock crank, rods, and pistons (got the crank polished and all from the shop i got the block at)
new rings
new bearings (rod,main,cam)
arp rod bolts and got them resized
ported l92 heads(still stock but im trying to)
ported fast 102 intake
fast throttle body
cam 230/234 and .610 lift
built t56
stock 10 bolt
i want to do a procharger maybe around 5-8 psi???
and this will all go on a 02 z28
can u guys please recommend things and advise if anything should be diffrent? and this is my first post so sorry if i made any mistakes.
#6
TECH Apprentice
Join Date: Jan 2002
Location: Gilbert, AZ
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
The only reason I didn't go with him for the heads I ordered yesterday was his turn around time from being so busy. I didn't want my car sitting forever so I bought a new set of heads and now I'm selling my factory heads to minimize downtime.
Trending Topics
#9
Thanx for the help guys So wats the average cost to get a stage 3 port job ? And how about the engine setup can I b around 475 na ? And again I wanna say thank you to u guys I couldn't find anyone here or I didt reserch enough I guess lol