Can i spray my LQ9/L92 motor ? PLEASE READ
#1
10 Second Club
Thread Starter
iTrader: (3)
Join Date: Oct 2011
Location: Venus (DFW) TX
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Can i spray my LQ9/L92 motor ? PLEASE READ
Want to get a couple opinions about spraying my new motor if i can. Here is my combo.
LQ9 STOCK bottom 20k miles
L92 heads ported, milled .020 with good springs
Comp custom grind 227/239 .614/.624 114 LSA
LS3 intake ported with 90mm Edelbrock TB
Longtube headers with true duals x piped and dumped
Will be having a friend do the tune with HP tuner
Car is a 99 SS M6
Anyway i have a 175 wet shot system to put on the car if the stock cast flat tops will handle it. Have been told they will, but honestly i think im gonna be pushin it as it is with no juice. Any opinions will help me out
Also any guesses on what kind of power i should expect from this setup ?
LQ9 STOCK bottom 20k miles
L92 heads ported, milled .020 with good springs
Comp custom grind 227/239 .614/.624 114 LSA
LS3 intake ported with 90mm Edelbrock TB
Longtube headers with true duals x piped and dumped
Will be having a friend do the tune with HP tuner
Car is a 99 SS M6
Anyway i have a 175 wet shot system to put on the car if the stock cast flat tops will handle it. Have been told they will, but honestly i think im gonna be pushin it as it is with no juice. Any opinions will help me out
Also any guesses on what kind of power i should expect from this setup ?
Last edited by SSLSXLQ9L92; 11-05-2011 at 05:21 PM.
#2
TECH Fanatic
Join Date: Jun 2006
Location: Hayward CA
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
Its all in ur tune and the way u drive ur car man...just do fresh oil changes and look at ur plugs everynow and then...my ls1 took a **** after a 200 shot but already was pushin 500rwhp thru heads and cam...i wanted more so i payed da price...so just say **** it and do it =p