LS9 Head Gasket? - LS1TECH



Generation IV Internal Engine 2005-2014 LS2 | LS3 | LS7 | L92 | LS9
Sponsored by:
Sponsored by:

LS9 Head Gasket?

Reply
 
Thread Tools Search this Thread
Old 01-16-2012, 11:42 AM   #1
On The Tree
Thread Starter
iTrader: (7)
 
crakhead's Avatar
 
Join Date: Feb 2005
Location: Deep In The South, Coral Gables.FL
Posts: 120
Default LS9 Head Gasket?

I am trying to find the Part Number for a set of LS9 Head Gaskets so I can Install my L92 Heads to my Stock 6.L LS2 Block...I was using the stock GM MLS Head Gasket 4.60" and when tuning the engine to run on e-85 fuel I blew one or both of the stock head gaskets, one or both heads must of lifted.

The stock heads are ported, so is the Intake, I am using ARP bolts, in other words i have all the good stuff in the engine.

I tried doing a search but there is so much gibberish that i can't get the info i need.

Can some one please chime in and help me get back on the road...

Regards,
crakhead
crakhead is offline   Reply With Quote
Old 01-16-2012, 11:53 AM   #2
Staging Lane
iTrader: (5)
 
Join Date: Jun 2005
Location: NM
Posts: 97
Default

Quote:
Originally Posted by crakhead View Post
I am trying to find the Part Number for a set of LS9 Head Gaskets so I can Install my L92 Heads to my Stock 6.L LS2 Block...I was using the stock GM MLS Head Gasket 4.60" and when tuning the engine to run on e-85 fuel I blew one or both of the stock head gaskets, one or both heads must of lifted.

The stock heads are ported, so is the Intake, I am using ARP bolts, in other words i have all the good stuff in the engine.

I tried doing a search but there is so much gibberish that i can't get the info i need.

Can some one please chime in and help me get back on the road...

Regards,
crakhead

12622033 Is the number I believe.
gnfan is offline   Reply With Quote
Old 01-16-2012, 12:29 PM   #3
On The Tree
Thread Starter
iTrader: (7)
 
crakhead's Avatar
 
Join Date: Feb 2005
Location: Deep In The South, Coral Gables.FL
Posts: 120
Default

Quote:
Originally Posted by gnfan View Post
12622033 Is the number I believe.
Would you happen to know what the Bore is on that part number?
Or the thickness?

Regards,
crakhead
crakhead is offline   Reply With Quote
Old 01-16-2012, 01:12 PM   #4
TECH Enthusiast
iTrader: (5)
 
5 Liter Eater's Avatar
 
Join Date: Feb 2004
Location: Pearland, TX
Posts: 521
Default

http://www.summitracing.com/parts/NAL-12622033/

4.100 in. Bore, .051 in. Thickness
5 Liter Eater is offline   Reply With Quote
Old 01-16-2012, 01:59 PM   #5
On The Tree
Thread Starter
iTrader: (7)
 
crakhead's Avatar
 
Join Date: Feb 2005
Location: Deep In The South, Coral Gables.FL
Posts: 120
Default

Quote:
Originally Posted by 5 Liter Eater View Post
http://www.summitracing.com/parts/NAL-12622033/

4.100 in. Bore, .051 in. Thickness
Thanks for the Heads up 5 Liter Eater...

They are the same thickness as the stock GM-MLS...when i tune it back to e-85 and start giving the engine more timing i hope these suckers are going to take the abuse and not lift the Heads, mind you my car is N/A...

Has any body tried any other Gaskets, like Fel-Pro, Cometic, Athena, cause I know they come in different thickness and Bore sizes...
Regards,
crakhead

Last edited by crakhead; 01-16-2012 at 02:05 PM.
crakhead is offline   Reply With Quote
Old 01-16-2012, 02:28 PM   #6
TECH Resident
iTrader: (22)
 
02blackbeauty19's Avatar
 
Join Date: Oct 2006
Location: Shreveport, Louisiana
Posts: 911
Default

Put some studs in it to help keep them down
02blackbeauty19 is offline   Reply With Quote
Old 01-16-2012, 10:57 PM   #7
TECH Enthusiast
iTrader: (5)
 
5 Liter Eater's Avatar
 
Join Date: Feb 2004
Location: Pearland, TX
Posts: 521
Default

PS: I just got my gaskets along with a bunch of other stuff from Summit. The bag they came in was labeled with the correct part number but the gaskets were not LS9 gaskets. They were incorrectly packaged. So check the part number on the gaskets themselves when you get them from whereever you decide to get them from.
5 Liter Eater is offline   Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
2009 t0 2013 C6 Gauge Cluster. crakhead Parts Classifieds 0 08-19-2014 09:32 AM
LS6 Intake gaskets??? TableLeg New LS1 Owners - Newbie Tech 2 07-31-2013 04:34 PM
Trying to figure out witch heads to use on a turbo 4.8 gone_in_10sec Forced Induction 14 05-08-2012 12:10 AM
Oil in the heads intake runners... crakhead Generation IV Internal Engine 46 02-23-2012 08:16 PM
Howto tell if its a real SS crakhead Chevrolet Camaro 1967-2002 3 03-15-2005 08:47 AM


Tags
12622033, buy, gasket, gaskets, gaskit, gaskits, head, ls1tech, ls9, motor, na, number, part, parts, thickness

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 09:10 AM.