need a stock LS3 crank (budget rebuild)...and a coupla stock rods too
#1
Teching In
Thread Starter
Join Date: Apr 2011
Location: Rockford, IL
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
need a stock LS3 crank (budget rebuild)...and a coupla stock rods too
On a tight budget, and putting back together an LS3 that puked a rod journal.
Machine shop indicates a need for .030 under, and I'm just not comfortable with that. So here's what I need to do...
Source a used stock LS3 crank in good condition. (Any of you stroker kit guys have one you're using as a doorstop?)
Keepin the stock rods, but will probably have to replace 2 from the event that took out the bearings and journal.
Any potentially interested parties, please PM.
Thanks,
Steve
Machine shop indicates a need for .030 under, and I'm just not comfortable with that. So here's what I need to do...
Source a used stock LS3 crank in good condition. (Any of you stroker kit guys have one you're using as a doorstop?)
Keepin the stock rods, but will probably have to replace 2 from the event that took out the bearings and journal.
Any potentially interested parties, please PM.
Thanks,
Steve