Every engine builder should have one of these
04-20-2015, 12:00 PM
#63
Thank you BOLO for your Business!
Christian
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
05-05-2015, 09:08 PM
#64
Still waiting on the short block to be completed by ERL but went ahead and ordered the full set. Very fast service and quality product. I've done the front cover without the tool before but it's a gamble. Right tool for the right job saves time and money. Thanks guys.
05-21-2015, 04:27 PM
#67
Thank you for your business!
Christian
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
06-17-2015, 01:59 PM
#68
Thank you everyone that purchased products from SacCityCorvette! Your business is greatly appreciated!
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Last edited by saccitycorvette; 06-17-2015 at 03:17 PM.
06-17-2015, 03:17 PM
#69
Thank you Cold Zero for your business!
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
06-18-2015, 12:27 PM
#71
What number did you leave? We return every call we get unless it got over looked somehow.
Please call 916 968-4451 if I cant answer, I or one of our staff will get right back to you.
As for the Oil pump tool, we are not manufacturing them anymore because there is not much demand for them because we recommend pulling the pump cover and double checking the clearances anyway.
Thank you,
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
06-18-2015, 05:19 PM
#73
Thank you for your business, we appreciate it!
Christian
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
04-29-2016, 01:01 PM
#75
We have them in stock when you are ready!.
Thanks
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
05-09-2016, 12:44 PM
#76
Sure makes the job go smoother when you have the right tool for the job!
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
05-10-2016, 04:58 PM
#77
AlignIt Tools are to designed to align the Timing Cover & Rear Main Cover and install the Seals on all LS base engines.
Whether your a Pro or a Do Your Own Repair kind of guy, here is a simple but very effective tool to help you make
easy work of installing your LS1-2-3-6-7-9- LQ4-LQ9- 5.3-6.0 Timing and Rear Main cover and seals. Works with all LS based engines!
The AlignIt tool gets the timing & rear main covers centered perfectly with the crank and installs the seal in seconds! Check out the videos.
Having the seal centered accurately with the crank minimizes the chance of seal leakage.
Timing Cover AlignIt Only $29.95
Rear Main AlignIt Only $39.95
Hub simulator only $27.95
Buy more than one of the AlignIt Tools and save!
http://www.saccitycorvette.com/AlignItTools.html
Here is a video that shows how simple it is to use. Tools used in videos are prototypes. The tools we sell are much nicer!
Installation with Oil Pan off.
SacCityCorvette LS1 2 3 6 7 timing cover tool. - YouTube
Here is a Video the shows installation of Rear Main cover and seal with the Oil Pan on.
AlignIt Rear Main Cover Tool - YouTube
Whether your a Pro or a Do Your Own Repair kind of guy, here is a simple but very effective tool to help you make
easy work of installing your LS1-2-3-6-7-9- LQ4-LQ9- 5.3-6.0 Timing and Rear Main cover and seals. Works with all LS based engines!
The AlignIt tool gets the timing & rear main covers centered perfectly with the crank and installs the seal in seconds! Check out the videos.
Having the seal centered accurately with the crank minimizes the chance of seal leakage.
Timing Cover AlignIt Only $29.95
Rear Main AlignIt Only $39.95
Hub simulator only $27.95
Buy more than one of the AlignIt Tools and save!
http://www.saccitycorvette.com/AlignItTools.html
Here is a video that shows how simple it is to use. Tools used in videos are prototypes. The tools we sell are much nicer!
Installation with Oil Pan off.
SacCityCorvette LS1 2 3 6 7 timing cover tool. - YouTube
Here is a Video the shows installation of Rear Main cover and seal with the Oil Pan on.
AlignIt Rear Main Cover Tool - YouTube
06-02-2016, 06:03 PM
#78
Thank you Jay for your business and the bump!
Christian
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
07-06-2016, 01:15 AM
#80
Hi Smackdown,
Sorry you feel the $8.50 is unreasonable for shipping. $8.50 is what we have to get when we factor in the cost of shipping, label, packaging and the labor we pay to get the product to you.
Thanks
Christian
Sorry you feel the $8.50 is unreasonable for shipping. $8.50 is what we have to get when we factor in the cost of shipping, label, packaging and the labor we pay to get the product to you.
Thanks
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!