Help with ptv clearance ?s
11-05-2013, 06:10 PM
#1
Teching In
Thread Starter
Join Date: Dec 2011
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Help with ptv clearance ?s I got a gen III 6.0 iron block shortblock. It has -2cc diamond pistons with .105 I and .175 e. The came is a 625 625 232 236 112lsa and the heads are CNCd ls3(4863 casting) with 65cc chambers. Just curious if these are going to work as far as piston to valve clearance and what size pushrods I'm gonna use. Obviously I know the best way to find out is clay it up but before I waste my time I would like to see if anybody has encountered a setup like this or has something and may no if it will work or not.
