O.N.

Has anyone run a mozez head combo on the street yet or fitted it under the hood with a low level intake manifold so it still looks stock with he hood closed.

O.N.

nobody? these are classified as one of the most badass set of heads out there and nobody is running them on the street?

UGotBeaT

No one makes a low level intake for these heads or would even bother to.

What exactly are you wanting to do?

newschool72

iTrader: (12)

A head can only move as much air as the intake will feed it. No need for a 8500rpm head if the intake lays over at 6K. Kind of like throwing an 88mm turbo on an engine and setting the rev limiter at 4500. You will never know what the engine is capable of.

philds19

I agree you wouldn't need a set of those with anything under 2000 hp

raymond mckinney

iTrader: (4)

Plenty of Heads that can make 600-700 wheel a lot cheaper on a street motor than a Mozez head.

O.N.

ITB's will feed it just as well as a high-rise, have seen shops make over 1000HP N/A with these heads ITB's should be close to a dual high rise and keep it under the hood.

No reason other that would be cool to have it running on the street.