2011 L99 for a RX7 Swap- What do I need to do?
02-23-2014, 10:38 PM
#1
Teching In
Thread Starter
iTrader: (12)
Join Date: Mar 2006
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
2011 L99 for a RX7 Swap- What do I need to do? I might be picking up an very low millage L99 for a good price. I will be running it with a t-56. A few Noob Questions:
1) What all will I need to do/buy to get it to run with the T56? PCM? Harness?
2) Should I do the l99 to ls3 swap? I don't care about much more HP at this point, I am tracking the car and just want reliability and longevity?
3) Any reason not to get the engine?
Thanks
1) What all will I need to do/buy to get it to run with the T56? PCM? Harness?
2) Should I do the l99 to ls3 swap? I don't care about much more HP at this point, I am tracking the car and just want reliability and longevity?
3) Any reason not to get the engine?
Thanks
02-24-2014, 02:31 PM
#2
On The Tree
iTrader: (6)
Join Date: Jan 2009
Location: Newport NC
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Hey there
You can get a 98-02 f-body wiring harness from a t56 car. You will have to modify it to get it to work, mostly for the power connections and stuff like tach, fuel pump and a few others. Go to this site, they have alot of parts for these type conversions, such as k member and tranny crossmember. http://grannys.tripod.com/mainpage.html
I did a ls1/t56 into a 1990 rx7 for my son. It was a few years ago, but pm me if you have questions, may be able to answer them.
hth
andy schuck
You can get a 98-02 f-body wiring harness from a t56 car. You will have to modify it to get it to work, mostly for the power connections and stuff like tach, fuel pump and a few others. Go to this site, they have alot of parts for these type conversions, such as k member and tranny crossmember. http://grannys.tripod.com/mainpage.html
I did a ls1/t56 into a 1990 rx7 for my son. It was a few years ago, but pm me if you have questions, may be able to answer them.
hth
andy schuck