LSX Engine Builders Needed For Quote
01-30-2008, 04:26 AM
#1
Teching In
Thread Starter
Join Date: Nov 2006
Location: Houston, Tx
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
LSX Engine Builders Needed For Quote To Whom It May Concern:
I’m taking a stab at this since I’m not certain of the information needed. Although I have a general idea in terms of projected numbers, I’m sure additional information might be needed from me in order to assist you guys. Ultimately, I’m looking for a well thought out engine (naturally aspirated) which will give me 550rwhp and well over 500rwtq between 2,800 – 7,000rpm’s. Car still needs to pass inspection and run on 93 octane or less. I need a motor which is very reliable for street-strip and road race action. Reliability and longevity are key for this motor. This is not a daily driven vehicle.
I’m very much open to suggestions and ideas, so long as forced induction isn’t brought to the table. Not against it whatsoever, I just prefer N/A. If it’s not much trouble, can you provide me with a cost and parts breakdown for review?
Warmest Regards,
I’m taking a stab at this since I’m not certain of the information needed. Although I have a general idea in terms of projected numbers, I’m sure additional information might be needed from me in order to assist you guys. Ultimately, I’m looking for a well thought out engine (naturally aspirated) which will give me 550rwhp and well over 500rwtq between 2,800 – 7,000rpm’s. Car still needs to pass inspection and run on 93 octane or less. I need a motor which is very reliable for street-strip and road race action. Reliability and longevity are key for this motor. This is not a daily driven vehicle.
I’m very much open to suggestions and ideas, so long as forced induction isn’t brought to the table. Not against it whatsoever, I just prefer N/A. If it’s not much trouble, can you provide me with a cost and parts breakdown for review?
Warmest Regards,
Last edited by conkrete21; 01-30-2008 at 07:45 AM.
