ls3 lifters
#1
ls3 lifters
is the ls3 using a diffrent size lifter then the other ls motors. i bought a set of ls2 lifters from comp and they to big. measured them and ls1 lifters and they the same
Last edited by EXCESSIVE81; 02-16-2008 at 09:42 PM.
#4
TECH Enthusiast
iTrader: (13)
Join Date: Nov 2006
Location: Right across the river from Huntington, WV
Posts: 698
Likes: 0
Received 1 Like
on
1 Post
all the factory lifters are supposed to interchange. i dunno why an ls2 style lifter wont fit in an ls3 block? maybe there's a difference in the lifter guides.
#6
TECH Enthusiast
Join Date: Dec 2001
Location: Dublin, CA
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
Hi Excessive81, did you figure this out? I bought LS7 lifters for the forged LS3 shortblock that PowrMax.com is shipping out to me.
I'm wondering if you're talking about the fit of the lifters in the block, or in the lifter trays. The trays are different, but the lifter bores and lifters should be the same size.
I'm wondering if you're talking about the fit of the lifters in the block, or in the lifter trays. The trays are different, but the lifter bores and lifters should be the same size.