BadLtBlu99TA

iTrader: (9)

My question is can i install the lifters with lifter trays then install the heads before i install the oil pan and covers and oil pickup tube oil pump ect ? or is there a certain way i should go about this ? just wonder..

Will part # 134-3610 work for TSP 402cid engine ? need advice asap , thanks .. i dont have ARP lube , so will oil work ? thanks ..

socmguy

iTrader: (18)

Yes, you can assemble it that way,
don't know if that part will work,
oil will work if you don't have arp lube

Randy WS6

iTrader: (69)

There is a different torque spec with the oil, go to ARP web site to see.

DrkPhx

iTrader: (15)

That is the same head bolt kit I use. Even though you can use motor oil, I seriously recommend using the ARP Moly lube. The bolts torque much smoother and easier. If you do use oil, keep in mind the torque spec is higher.

BadLtBlu99TA

iTrader: (9)

thanks all .. appriciated it !!

BadLtBlu99TA

iTrader: (9)

i got my Head bolt kit and it didnt have any ARP Moly Lube in the box , how could i get this ? FAST ??? i need this stuff ASAP !!! like tommorow Afternoon !!

DrkPhx

iTrader: (15)

A local speed shop should carry it. Summit Racing (in Ohio) also has it.

Randy WS6

iTrader: (69)

I got a bottle of it from Summit for 19.00 but you can get the little packet to alot cheaper

czwalga00gt

iTrader: (3)

Jegs is in columbus.

socmguy

iTrader: (18)

yep, Jegs/Summit will ship it fast as hell!