Dropping in to introduce myself
02-26-2009, 04:47 PM
#1
FormerVendor
Thread Starter
Join Date: Dec 2007
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Dropping in to introduce myself Hello all! Just wanted to stop and introduce myself. My name is Brian and I'm part of the team from ABACO Performance. We manufacture and distribute state of the art digital programmable mass air meters for pretty well all makes an models. Please don't hesitate respond, pm, or email any questions or comments. I look forward to it.
03-07-2009, 10:28 AM
#3
LS1Tech Sponsor
Join Date: Feb 2006
Location: Rockfield Kentucky
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
Oh hell there goes the neighborhood! Hahaha
Really Brian is a good guy that I have known for years.
I have been using the Abaco DBX Mass Air meter on several GM Performance Parts Crate engines that I test on the dyno.
LS1 F body harness and also a GMPP Crate harness with an E67 and fly by wire.
These meters work very well with the wild cams!
No more of the Speed Density crud from the 80's
Robin
Really Brian is a good guy that I have known for years.
I have been using the Abaco DBX Mass Air meter on several GM Performance Parts Crate engines that I test on the dyno.
LS1 F body harness and also a GMPP Crate harness with an E67 and fly by wire.
These meters work very well with the wild cams!
No more of the Speed Density crud from the 80's
Robin
04-01-2009, 10:01 AM
#4
TECH Resident
iTrader: (9)
Join Date: Oct 2005
Location: TEXAS
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
welcome, do you have any comperision test of a tuned heads and cam setup, and then only switched the MAF to one of yours? i have been reading alot about your MAF. also how would it respond to a nitrous dry spraying through the MAF
04-13-2009, 06:11 PM
#5
FormerVendor
Thread Starter
Join Date: Dec 2007
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts