new to site
06-16-2009, 01:17 PM
#1
Teching In
Thread Starter
Join Date: Jun 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
new to site hey guys, antoher ford owner here so let the jokes begin lol! 
i drive a new edge GT with pretty much full bolt ons, 410s, drag suspension, wieght reduction, slicks for the track, DRs for daily driving, and a little spray. doing a 4v swap this weekend and getting tuned shortly after
motor is a stock b headed teskid block 4.6. hoping to put down around 300rwhp with imrc delete, udp, LTs, o/r x, catback, cai, and shortening the runners 1/2 inch
pretty much same setup as bitemark46 which as many of you know has gone 11.6x@112+ all motor
hoping to run low 11s consistently on the bottle after 31 spline alxes go in next month. i would love to get a 10 second pass in but i know it will be difficult
maybe ill get a chance to run some of you local ls1s in the tampa area
i drive a new edge GT with pretty much full bolt ons, 410s, drag suspension, wieght reduction, slicks for the track, DRs for daily driving, and a little spray. doing a 4v swap this weekend and getting tuned shortly after
motor is a stock b headed teskid block 4.6. hoping to put down around 300rwhp with imrc delete, udp, LTs, o/r x, catback, cai, and shortening the runners 1/2 inch
pretty much same setup as bitemark46 which as many of you know has gone 11.6x@112+ all motor
hoping to run low 11s consistently on the bottle after 31 spline alxes go in next month. i would love to get a 10 second pass in but i know it will be difficult
maybe ill get a chance to run some of you local ls1s in the tampa area
Last edited by 1POSford; 06-16-2009 at 02:04 PM.
