Greetings New Member from Cali
#1
Greetings New Member from Cali
Hey everyone,
I'm the owner of a '95 Trans Am, it's been modified a wee-bit.
I posted this elsewhere.. but this is the bird...
Here is one really awesome LT to LSX swap done by Blaine Fabrication out in California. A bunch of build photo's of the engine all the way to installation are below. The motor is one amazing piece of art created by TPiS, 422CUI dry sump race engine(well in excess of 700hp). The brakes, are Baer 6R calipers at all 4 corners. An Unbalanced Engineering torque arm, helps get the power to the ground thru the Strange 12 Bolt rear end. VFN body work on the car as well.
http://www.flickr.com/photos/peakski...60660648/show/
Here is the car now completed - of course before these pics see what happened on a set of factory reproduction rims...
http://vimeo.com/19938715
&
http://www.flickr.com/photos/peakski...23105523/show/
So Weld Racing and Custom Vehicle Wraps (cvwraps.com) stepped up to make the car awesome looking, after Modern Bench Operations put things back where they belonged. Weld Racing has partnered with Kurtz to supply him some amazing looking RT-S rims. CVWraps is supplying the autowrapping, and get this in Forza 3 motorsport, BDI (Big Daddy Inc) created the design in the game which is now on the car.
http://vimeo.com/23842762
http://weldracing.com/press/new-prod...d-rt-s-wheels/
http://www.flickr.com/photos/peakski...45803978/show/
http://www.flickr.com/photos/peakski...07416025/show/
http://www.flickr.com/photos/peakski...18179297/show/
www.baer.com
www.tpis.com
www.cvwraps.com
www.weldracing.com
www.yokohamatire.com
Once upon a time, this car was a engine test bed for Lingenfelter Performance Engineering and Multi time magazine car.
I'm the owner of a '95 Trans Am, it's been modified a wee-bit.
I posted this elsewhere.. but this is the bird...
Here is one really awesome LT to LSX swap done by Blaine Fabrication out in California. A bunch of build photo's of the engine all the way to installation are below. The motor is one amazing piece of art created by TPiS, 422CUI dry sump race engine(well in excess of 700hp). The brakes, are Baer 6R calipers at all 4 corners. An Unbalanced Engineering torque arm, helps get the power to the ground thru the Strange 12 Bolt rear end. VFN body work on the car as well.
http://www.flickr.com/photos/peakski...60660648/show/
Here is the car now completed - of course before these pics see what happened on a set of factory reproduction rims...
http://vimeo.com/19938715
&
http://www.flickr.com/photos/peakski...23105523/show/
So Weld Racing and Custom Vehicle Wraps (cvwraps.com) stepped up to make the car awesome looking, after Modern Bench Operations put things back where they belonged. Weld Racing has partnered with Kurtz to supply him some amazing looking RT-S rims. CVWraps is supplying the autowrapping, and get this in Forza 3 motorsport, BDI (Big Daddy Inc) created the design in the game which is now on the car.
http://vimeo.com/23842762
http://weldracing.com/press/new-prod...d-rt-s-wheels/
http://www.flickr.com/photos/peakski...45803978/show/
http://www.flickr.com/photos/peakski...07416025/show/
http://www.flickr.com/photos/peakski...18179297/show/
www.baer.com
www.tpis.com
www.cvwraps.com
www.weldracing.com
www.yokohamatire.com
Once upon a time, this car was a engine test bed for Lingenfelter Performance Engineering and Multi time magazine car.
#2