Jamescassy

iTrader: (3)

I just bought a s471 off eBay rebuilt by apt . I have 5.3 stock with ls1 heads 4200 stall turbo 350 with 275 geared 9" ford rear in a 1995 Sonoma weighing 3100 pounds . At exh is 1.0 t4 devided . Planning a little of street and strip not daily driver . Doesn't have ac,power steering or water pump dragging it down meizer water pump . I am looking at 52# injectors and walbro twins . That's the fuel pump for sure and am open to different bigger or smaller injectors ? Stock ls1 fuel rails on lingenfelter Holley intake ? Sanderson shorty headers . Am running two driver side headers the driver side in its regular position and another on passenger flipped up and back . 2-12 crossover around back with turbo mounted on passenger head . I know I'm putting all this info in the wrong place and am noobie . But can copy and paste it to the right place later . Stock cam now and custom Tick or other sponsor specialist cam after I get my forged rotating assembly . Any info about that turbo ? 71.06/101.45-77.5/87 thanks also have harness from current performance haven't lately but do have some videos on YouTube jamescassy is handle trying to think of more info 3" intercooler up front . All about finished looking for more of a Texas mike style little truck cage is coming over winter . Going to run medium boost maybe 8 then 12 after shake down . arp head studs 44 mm tial style gate bov not yet ordered ? Any info appreciated ! Even how ,what , when and where to dos and donts to be a good tech member !