obviously doing a ls mustang swap
10-25-2014, 06:42 PM
#1
Teching In
Thread Starter
Join Date: Oct 2014
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
obviously doing a ls mustang swap Doing a LS swap into a sn95 V6 mustang. Have read 20+ build threads and still have a few questions so I am here to get them answered! Im still researching on what fuel system to run, what I am going to do to the 5.3 heads, and what fuel system to run knowing I'll be going turbo in the future.
Any suggestions on what harness, fuel system, cam and heads would be greatly appreciated.
The only thing I havnt looked into yet would be what trans I'll be using.
Can't post in the classifieds but looking for misc. parts...
ls1 intake
TB
fuel rails
wiring harness and computer
injectors
Thank you for your time reading this boring introduction. lol
Any suggestions on what harness, fuel system, cam and heads would be greatly appreciated.
The only thing I havnt looked into yet would be what trans I'll be using.
Can't post in the classifieds but looking for misc. parts...
ls1 intake
TB
fuel rails
wiring harness and computer
injectors
Thank you for your time reading this boring introduction. lol
10-25-2014, 10:42 PM
#2
On The Tree
iTrader: (3)
Join Date: Oct 2012
Location: Under the truck
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Youre most likely to find most parts on eBay and some at a junkyard. About the fuel system, it depends really on what youre looking powerwise. The trans, i would recommend a 4l80e. Theyre strong stock and hold lots of power with a shift kit and a big cooler.
10-29-2014, 03:36 PM
#3
Welcome to the forum! Keep us in mind if you need any parts or have any tech questions. Just shoot us an email at support@tickperformance.com or call us here at the shop - 336.719.0599 