Hello from UT. Here to learn
01-13-2016, 09:46 AM
#1
Teching In
Thread Starter
Join Date: Jan 2016
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hello from UT. Here to learn I am as green as they come when it comes to Sensors. And this LT1 conversion to LS1 is Sensor Beach. So I'm here to learn all I can about this
stuff. I have a 34 Ford Hot Rod. I put a 1994 LT1 in. And took the leap into the EFI 24X conversion kit. Changing the front timing cover over to a 1997 crank reader. Then went to the #12200411 PCM flashed for bare bones by Brendan. With the Painless wire harness #60509. With a 4L60E trans and tail shaft adapter for the cable drive speedo.
Now trying to put all this together. That's why I am here. Thanks for taking me in. I NEED YOUR HELP!!!!!!
stuff. I have a 34 Ford Hot Rod. I put a 1994 LT1 in. And took the leap into the EFI 24X conversion kit. Changing the front timing cover over to a 1997 crank reader. Then went to the #12200411 PCM flashed for bare bones by Brendan. With the Painless wire harness #60509. With a 4L60E trans and tail shaft adapter for the cable drive speedo.
Now trying to put all this together. That's why I am here. Thanks for taking me in. I NEED YOUR HELP!!!!!!
