Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

New Here With ?

Thread Tools
 
Search this Thread
 
Old 10-16-2008, 09:42 PM
  #1  
Teching In
Thread Starter
 
CARPOOR's Avatar
 
Join Date: Oct 2008
Location: FLA
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default New Here With ?

New here from FLA. I got some ? I picked up a totaled 03 2500 for a donor for a 51 suburban. On data tag it says lq4 & mt1. 6.0 4l80? It has aluminum 317 heads and iron block. What comp. ratio? What parts are needed off donor for a conversion,besides motor, trans, ecm?
Old 10-16-2008, 11:30 PM
  #2  
Launching!
iTrader: (4)
 
magic's Avatar
 
Join Date: Oct 2006
Location: Toronto
Posts: 282
Likes: 0
Received 0 Likes on 0 Posts

Default

compression ratio is 9.4:1 for LQ4
Old 10-17-2008, 12:20 AM
  #3  
11 Second Club
iTrader: (17)
 
ryanvv355's Avatar
 
Join Date: Mar 2007
Location: Hudsonville, MI
Posts: 756
Likes: 0
Received 0 Likes on 0 Posts

Default

get the harness, tac module, accelerator pedal assy, and fuse block, along with as many hoses as you can, it never hurts to have them, even if you don't use them.
Old 10-17-2008, 04:55 PM
  #4  
Teching In
Thread Starter
 
CARPOOR's Avatar
 
Join Date: Oct 2008
Location: FLA
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Where is the tac module? I think im going to get a aftermarket harness,will i still need the truck harness.If so do i need the whole harness or just engine harness?




All times are GMT -5. The time now is 10:12 AM.