finally 11's w/stock internals
#1
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Mar 2005
Location: Saline, MI
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
finally 11's w/stock internals
DA was about -122 ft
stock internals with a 2.73 gear
about 3500lb raceweight
Mods are:
FAST 90/90
Yank PYE3600
QTP headers/ORY/4" bullet dumped
255/16 M/T's radials/bogart 3.5 fronts
ASP Pulley/SLP Lid
metco rear LCA/spohn solid rear sway bar
I'm pretty sure I broke the differential on the last pass of the night. Driving home it started cracking and popping when turning left.
a photo from that night
stock internals with a 2.73 gear
about 3500lb raceweight
Mods are:
FAST 90/90
Yank PYE3600
QTP headers/ORY/4" bullet dumped
255/16 M/T's radials/bogart 3.5 fronts
ASP Pulley/SLP Lid
metco rear LCA/spohn solid rear sway bar
I'm pretty sure I broke the differential on the last pass of the night. Driving home it started cracking and popping when turning left.
a photo from that night
#6
Trending Topics
#8
TECH Enthusiast
iTrader: (8)
Join Date: Feb 2007
Location: schenectady, ny
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
nice, almost looks like my setup, im at 12.3 right now, just put in 3.42s and im looking at doing a 90/90 setup. What were your gains from the 90/90? I need to do something with my trap speed because im only at 108 haha
#11
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Mar 2005
Location: Saline, MI
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
I dont know exactly what I gained from the 90/90. I did the exhaust and removed a few pounds from the car at the same time I installed the intake. I did just re-install the factory intake. If I make it to the track by the end of the season, I'll post up the results.