Dynamometer Results & Comparisons - 408 ms4 243's dyno numbers
smokinponcho73
10-23-2008, 01:47 AM
(from a previous post) Ran my car today with 408, ms4, stage 1 243's stock ls6 intake,basic bolt ons on a m6 through stock 10 bolt and i ran this on a mustang dyno and made 470 hp and 440 ft lbs. I ran out of injector on the top , but it's got some power and im deffinatley happy
94'BLKBRD
10-23-2008, 01:50 AM
Nice numbers. Throw on a ported FAST intake/100mm TB and hit 500rwhp.
Sales2@Texas-speed
10-23-2008, 09:21 AM
Nice results for a 2.00"/1.55" valve head on a mustang dyno! :drive:
Got a graph by chance?
smokinponcho73
10-23-2008, 02:07 PM
ya im having someone photo copy it right now
c0ncEpT
10-23-2008, 03:01 PM
Very good numbers for the below average Top end you have! With a intake change I bet it would be close to 500RWHP. With a swap to some aftermarket casting heads with some big valves who knows that it could make!
fastvet
10-23-2008, 03:01 PM
Dont want to rain on your parade, but that seems like alot of horsepower with that setup on a mustang dyno. ...what gears are you running?
venom ws7
10-23-2008, 03:08 PM
Great numbers with Mustang dyno man Congrats.
Still a lot left on the table too.
smok'nZ
10-23-2008, 03:27 PM
1 3/4 Or 1 7/8?
SSilverSSurfer
10-23-2008, 04:12 PM
nice numbers for what you got, what are the plans now?
bad95killer
10-23-2008, 06:52 PM
Very nice numbers buddy...Congrats :cheers:
peace
smokinponcho73
10-24-2008, 01:42 AM
Im running 3.42 rear gears and 1 7/8" headers. I know there is plenty on the table but i just have to save up money now, next comes a 9" after that fast 92/92 setup then nitrous and probably step up to trickflows. But first I need injectors it leaned out on top i will get the dyno sheet on here soon but here is a video to hold you off for now
http://www.youtube.com/watch?v=P2ihJznCpFA
LSGunZ28
10-24-2008, 03:47 AM
Only a 10 bolt, but 2 more questions...
what kind of flywheel and what pulley? underdrive or stock?
smokinponcho73
10-24-2008, 03:59 PM
stock flywheel i think and an under drive crank pulley
Sales4@Texas-Speed
10-24-2008, 05:13 PM
Awesome numbers from what looks like a budget build. Can't beat 470 on a mustang dyno with the injectors maxed, should be an easy 500rwhp car on a dynojet once you get those injectors swapped out.
1bdbrd
10-25-2008, 11:16 PM
Who did the head porting? What does the rest of the exhaust look like?
ScreaminRedZ
10-26-2008, 08:11 AM
Great numbers! Can't wait to see how it does once it's all straightened out.
smok'nZ
10-26-2008, 10:52 AM
Who did the head porting? What does the rest of the exhaust look like?
prc it looks like
smokinponcho73
10-26-2008, 05:13 PM
I ran a 12.0 friday which wasnt bad considering i was going easy on the stock 10 bolt and since it leans out up top. I have a dyno graph but cant figure out how to get it on here in the correct format
MrElectric03
10-26-2008, 07:12 PM
Nice numbers, a FAST will for sure get you over 500whp. A local car is running a 402 with an MS3 and stage 1 heads with a FAST and hit 502whp through an M6 10 bolt.
Jrp1978
10-26-2008, 08:19 PM
I have a 402 with a ms4 1 3/4 headers and a fast 92 setup and made 492 hp 478 lbs torque! A better head alone say prc ls6 stg 2.5 or 3 would net you well over 500 with ease!!!! With a fast 92 even more ! Damn nice # !
smok'nZ
10-27-2008, 03:08 PM
I THINK A STG 3 head and fast 92/92 would be 520+
99blancoSS
11-04-2008, 08:16 PM
Good Job Brandon. He went with a CC Performance 408 and stage 1 ls6 (TSP) heads and an MS4, tuned locally by a shop we all like to use. (non-sponsor so no name..LOL)
LSGunZ28
11-05-2008, 04:29 AM
stock flywheel i think and an under drive crank pulley
sounds good... since im running about teh same combo and may go with a FAST soon, I think we will make close #s..