Nick @ HSW pls help?
#1
Nick @ HSW pls help?
I have one of your ashtray switch panels, and the lights always stay on no matter if the switch is tricked or not I'd rather the lights come on when i flip the switches, it would make things much easier to me. any help would be great, Thanks
#2
FormerVendor
iTrader: (4)
Join Date: Jul 2005
Location: Glenolden, PA
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
We can attach diagrams and a bunch of other documents a lot quicker than via a chat forum. Thanks.
Nick
#5
I've tried switching the wires around but they lights on the switches always stay lit.
Red= power
Black= ground
colors correspond to component
only using nitrous, purge, and acc.2 switches. acc1 is disconnected.
Red= power
Black= ground
colors correspond to component
only using nitrous, purge, and acc.2 switches. acc1 is disconnected.
Last edited by allmotor; 10-27-2008 at 03:54 PM.
#7
Trending Topics
#8
#11
FormerVendor
iTrader: (4)
Join Date: Jul 2005
Location: Glenolden, PA
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
Looking at the instructions compared to your picture, switch the 1 & 2 around. IE it looks like you have the acc. wire hooked up to where the 12+ wire should go. Let me know what you come up with. I'll try and check up here when I get home after dinner. Thanks.
Nick
Nick
#12
Yeah they are fine now. They worked before just the light was on all the time. I probably should have read the instructions lol. At least now it's how I wanted it. thanks bad6as and nick