Paint & Body Work - Shaved Door Handles: Yay or Nay. Lets see some pics.




texas94z
11-13-2008, 05:58 PM
I am considering shaving off my door handles but i have never seen 93+ fbodys with this modification.

Shaving the door handles would make a fbody look very sleek and clean IMO.

POST UP SOME PICS.


firefighter813x
11-13-2008, 06:06 PM
I did it to my bagged Tacoma and it was sick. I liked to pop the door open for chicks... lol Do it, and you post pics.

Swiat34
11-13-2008, 06:17 PM
I think most tracks have a rule that they won't let you touch the track unless you have handles, so if you've got dreams of time slips, I wouldn't do it, but if your ride will never see a closed curcuit, go for it! I want to see how it looks! I want to shave my fuel door and antenna. I already shaved the front license plate cover! I like my cars like I like my women...SHAVED!!! ;)


Swat


CamaroKidZ28
11-13-2008, 06:19 PM
I think most tracks have a rule that they won't let you touch the track unless you have handles, so if you've got dreams of time slips, I wouldn't do it, but if your ride will never see a closed curcuit, go for it! I want to see how it looks! I want to shave my fuel door and antenna. I already shaved the front license plate cover! I like my cars like I like my women...SHAVED!!! ;)


Swat

Haha, Yeah most tracks don't let you run without handles god forbid something happens and you're stuck inside.

I'm not sure how it would look.

texas94z
11-13-2008, 06:19 PM
I did it to my bagged Tacoma and it was sick. I liked to pop the door open for chicks... lol Do it, and you post pics.

I am doing tons of body work to my camaro right now. I already shaved my antenna and smoothed out the quarter panels. Now its time to work on the doors.

How hard was to shave the door handles?

texas94z
11-13-2008, 06:23 PM
I think most tracks have a rule that they won't let you touch the track unless you have handles, so if you've got dreams of time slips, I wouldn't do it, but if your ride will never see a closed curcuit, go for it! I want to see how it looks! I want to shave my fuel door and antenna. I already shaved the front license plate cover! I like my cars like I like my women...SHAVED!!! ;)


Swat

Damn! I go the track often.

But i am getting tired of e/ts and the track car image. So, the 94z will be the clean street car and my lsx car will be track car. :nod:

LS1BLKSS
11-13-2008, 06:47 PM
NAY!!! then you can't race at the track!!

texas94z
11-13-2008, 06:51 PM
Ill buy another set of doors :nod:.

ls1nova71
11-13-2008, 09:34 PM
I want to shave my fuel door and antenna.


Swat

How you going to put gas in? :bang: I guess you could fill it up before you shave the filler door! :D

texas94z
11-13-2008, 09:56 PM
How you going to put gas in? :bang: I guess you could fill it up before you shave the filler door! :D

I was just looking at my car and thought of that. How in the hell could you fill up if you did that modification???

texas94z
11-13-2008, 09:57 PM
Post up pics!!!

L3THAL_Z28
11-13-2008, 10:06 PM
how you going to put gas in? :bang: I guess you could fill it up before you shave the filler door! :d

lmao!

wabmorgan
11-13-2008, 11:51 PM
Post up pics!!!

:werd:

:pics:

italicizedsponge
11-14-2008, 10:01 AM
i shaved my key holes on both sides cause someone fucked up my car with a screw driver while i was at work. and i also didnt want to pay big bucks for new doors or to get the hole fixed.

still primered in these pics.
http://farm4.static.flickr.com/3271/3029262857_174502c5c2_b.jpg
http://farm4.static.flickr.com/3062/3030101378_f7f596c95c_b.jpg

samson_420
11-14-2008, 10:48 AM
^ That looks pretty cool.

6']['9
11-14-2008, 05:36 PM
i shaved my key holes on both sides cause someone fucked up my car with a screw driver while i was at work. and i also didnt want to pay big bucks for new doors or to get the hole fixed.



how did you do that?

italicizedsponge
11-14-2008, 07:14 PM
well the key holes were already punched out, so i put a piece of tape inside the door panel on the backside of the hole and used bondo to fill it in, sand it down until it was flat. then i would relay bondo down to fix imperfections and sand again. i did this process 4-5 times until it was good enough for my liking.

1FASTBIRD
11-14-2008, 10:36 PM
i shaved my key holes on both sides cause someone fucked up my car with a screw driver while i was at work. and i also didnt want to pay big bucks for new doors or to get the hole fixed.

still primered in these pics.
http://farm4.static.flickr.com/3271/3029262857_174502c5c2_b.jpg
http://farm4.static.flickr.com/3062/3030101378_f7f596c95c_b.jpg

Damn that look's clean bro

samson_420
11-14-2008, 10:39 PM
That little of a thing really makes that big of a difference. Well, it is white also.

Texas 02 Z28
11-14-2008, 10:43 PM
Shaved door handles and gas door could look insanely clean... Or really out of place, lol.

I think that shaved key hole though. Subtle, but not, lol.

silverM6TA
11-15-2008, 01:50 PM
do it. it would look very good. oh and cut down on aero. lol

Swiat34
11-16-2008, 12:32 AM
How you going to put gas in? :bang: I guess you could fill it up before you shave the filler door! :D

HEHE That would be the redneck way through it! I want to put the new fill cap in the channel between the weatherstrip and quarter panel up in the corner by the sail panel (where it's at it's widest). I'll use one of those caps that you don't need to remove and also add in a drain hole with a tube going out the bottom of the car in case of overflow. When complete, I'll just have to open the hatch to refuel and since it's outside the weatherstrip, I won't have to worry about the fumes. Not only do I get a clean look, but I also get a 'locked' gas door! :D

Swat

TransWS6Am
11-16-2008, 12:32 PM
i was going to shave my door handles when i shaved my antenna, but the fact that the doors are fiberglass held me back from doing it. didnt want to worry about them cracking later on down the road

richieg
11-16-2008, 06:57 PM
did mine, pics in sig. I did it for the same reason 1fast filled his key holes, damn thieves. They twisted out my key cylinders, then they tore my handles out. So I turned a bad thing into a good thing, atleast I tried to. It's been several years with no complaints.

6']['9
11-16-2008, 08:50 PM
did mine, pics in sig. I did it for the same reason 1fast filled his key holes, damn thieves. They twisted out my key cylinders, then they tore my handles out. So I turned a bad thing into a good thing, atleast I tried to. It's been several years with no complaints.

that looks great but does anyone have write up on how to do it.