Fuel pressure gauge install quesion.
#1
Teching In
Thread Starter
Join Date: Nov 2008
Location: San Diego, Ca. For now!
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Fuel pressure gauge install quesion.
I did a search and couldn't come up with anything and I hope this is the right forum to post this in. I bought a fuel pressure gauge with an electric sending unit. I know you have to hook it up through the schrader valve and I have to remove the core but where can I get a double female adapter to fit the
1/8" NPT sending unit to the schrader valve threads? The threads on the two are very different. On the sending unit their are pretty fine and on the schrader they are very course (almost pipe thread). Any help is greatly appreciated.
1/8" NPT sending unit to the schrader valve threads? The threads on the two are very different. On the sending unit their are pretty fine and on the schrader they are very course (almost pipe thread). Any help is greatly appreciated.
#3
TECH Junkie
iTrader: (4)
you need one of these... but I'm not sure if the sizes are right on the link below...
http://store.summitracing.com/partde...5&autoview=sku
can anyone verify...?
the sender goes into the side hole on that adapter...
http://store.summitracing.com/partde...5&autoview=sku
can anyone verify...?
the sender goes into the side hole on that adapter...