Noyzee

iTrader: (37)

just wondering whats going on for the winter with everyone?
anyone making changes etc?
i plan on re ring/ bearing my motor.
i sold my old heads already and tea is working on a set of 6 bolts for me, they should be bad *** and flow to 800 that said i will be getting a bigger solid roller. i also am going to test one of vinnys new big dawg intakes and hope it makes power. then do a dp set up and a plate so i will have 2 stages
also have a neal chance th-400 getting done right now so between all that i hope to be able to run 200 worth and run the 8.50 class then hit it with another 200 or so and see what she does.
car is all apart motor is all apart already, already started ordering and listing parts etc so im moving along.
whats up with everyone else?

rvnsky

iTrader: (8)

Im new so this will be my first winter with my fbody. But i will be sending the car to ttp and getting a bottom end done. I havent decided wether or not i wanna be set up for boost or a big shot...

badpewter-z

iTrader: (4)

oil change and get some new slicks or drag radials

nikon1999

iTrader: (22)

fuel pump, new valve springs, maybe some special sauce...

harner

iTrader: (16)

Right now I have an LT1 block at a machine shop getting work done and new internals. Also, assembling the LS1 and gather more swap parts for my Iroc.

And maybe an IEATSRT8 intake for the TBSS. Oh and replacing the brake booster in my '96 Grand Am.

z28rob18

iTrader: (7)

buildin a forged 383 lt1 bigger shot new rear driveshaft torque arm sway bar put a 6 point and 5 point harness in and hope for 10s next year lol goal is for 450rwhp na and around 650rwhp on the spray. i already bought the hoosier quick time pros and rims for them

Krazy98Z28

iTrader: (12)

10 pt cage
rebuilt tranny
neal chance converter
1 7/8 stepped to 2" Kooks
port the vic jr
remove abs
k member
manual rack
move battery to the back
race brakes

That's plenty for now

9.50 is my target for next season

Fireball

iTrader: (21)

freshen up motor
have torque converter adjusted
maybe switch to solid roller
beadlock wheels

Noyzee

iTrader: (37)

nice, sounds like good stuff to come. fireball you looking for 7's im sure?

marco, you looking to go 9.5 on motor?

timmy, secret head stuff to. hehe

Fireball

iTrader: (21)

mid to high 7s

Krazy98Z28

iTrader: (12)

I'm thinking 9.70-9.80 on motor then spraying a 75 shot or something

Noyzee

iTrader: (37)

nice man, thats movin out for sure!!! good luck

Noyzee

iTrader: (37)

cool, a little tweeking and tunning im sure you can chip away at it

Krazy98Z28

iTrader: (12)

Weight reduction will be the key and getting the car to launch on the trans brake plus the new converter is going to be huge.

z28rob18

iTrader: (7)

so how realistic is my goal of 10s if i meet my goal of 650rwhp on spray?

Noyzee

iTrader: (37)

yea, the weight will be nice. marty will set you up great im sure. i need to send mine back this year to have him mess with it because my glide to 400 swap im doing.
he is good tho. im almost tempted to have him set it up more based on all motor and see if i can run 8's on motor. we'll see

Noyzee

iTrader: (37)

if you make 650 rwhp with traction and dont go in the low low 10's high 9's sell the turd, she is broke

02BEAST

iTrader: (8)

Secret Intake and TB, Heads, Roll Cage, all Drag suspention, and a new rear after my 10 bolt blows up. And maybe a few of Noyzee's secret squirrel stuff. Hoping for 10's next year on motor.

Slowhawk

iTrader: (12)

My plan is to get my DD setup for the 11.5 class.That should be a fun class with no maintanence.Then of course get Krazy's car to run the 9.5 class.I'm still shooting for just motor.

z28rob18

iTrader: (7)

thats good to hear now i just have to build it lol been shopping around for good deals midwest chasis seems to hav the best for a rear but im stuck with the heads idk wat to do cuz im on budget