kidcamaro98

iTrader: (8)

heres my 2 local friends going at it. The one is a cammed/full bolt on 50 shot (was a 150 shot) C6 Z06 and the other is a 03 Terminator pulled/bolt on's and a ported blower. Z06 made a best of 556rwhp on motor, and the Cobra is 502rwhp.....

here's the Dyno videos of the cars...





and the race video....this was from a 75 roll in 2nd gear for the Z06, 3rd for the Cobra...



Dont mind the crappyness in the race video. I was the filmer in all the vid's and my camera sucks as night.

JTelesone

iTrader: (13)

that looks about right, thats what I saw from my old roomates c6Z same mods, bolt ons and h/c, car made 560. what cam in the z? sounds like a QM600

kidcamaro98

iTrader: (8)

its a Car Tech stage 2...the heads on the Z06 are bone stock...it actually is getting cartech stage 2 heads on it as we speak...should be good for 600rwhp N/A.

we did 3 races...all were pretty much the same thing. The other 2 races, the Z06 started in 3rd to let the cobra hang a little longer but we still pulled pretty damn hard.

capn smokey

iTrader: (1)

that was expected...

Skeet Skeet

I think it would have been a pretty good run if the c6z didnt have a cam. I still think it would have won though Was the z06 on the shot in the video?

FAsnakes

As expected.
C6Z FTMFW!!
Terminator needs a twin screw and weight reduction to even pace with a modded C6Z.. (and that's with the boost turned up)
That was damn ugly..

Redline-Motorsports

iTrader: (3)

cartek has nothing to do with the heads that are going on this car.

575-585rwhp is closer to where it will be N/A

sciff5

iTrader: (1)

Yeah thats about right.. if anything the Vette should have won by more. I dont even think most KB cobras would keep up with that car on 150 shot.

kidcamaro98

iTrader: (8)

no...no nitrous in the video.

The Z06 has gone a best of 10.6 @ 137 on a 100 shot and drag radials launching from a idle.

kidcamaro98

iTrader: (8)

o whats going on! is this Howard??

Im just going by what Tony told me, although he didnt tell me what type of heads, I just assumed it was Cartech since thats the cam he has....

Redline-Motorsports

iTrader: (3)

Its Jon.
Richard at WCCH is doing the heads.

kidcamaro98

iTrader: (8)

whats up....

is WCC also gonna be tuning it I assume??

Redline-Motorsports

iTrader: (3)

tuning it???? are you being serious?

WCCH = west coast cylinder heads.

kidcamaro98

iTrader: (8)

my bad....I thought you meant West Coast Corvettes.

PewterScreaminMach

iTrader: (7)

Well that was expected, even without the nitrous. That Cobra would definitely need a twin screw to keep up with the NA Z06.

Stopsign32v

iTrader: (1)

The Cobra had no chance but what the hell was he thinking racing a Z06 at 75mph? Did he eat a bowl of stupid for breakfast?

obZidian

iTrader: (2)

Awesome race... With heads, she should be around 480-490rwhp. 600rwhp+ with a moderate drivable cam, is a bit elusive as but 480rwhp is very doable.

Cannot wait to go this route. I even like the color!

PNYKLR-TA

iTrader: (1)

he definitely wasnt a

obZidian

iTrader: (2)

yeh, 75mph in 2nd is at a good spot in a C6 Z06.

Would of been sweet to see one from 40mph as I would like to see how the Z06 handled the extra power.

kidcamaro98

iTrader: (8)

it was I think 35* out that night..anything under 65mph for either car had traction issues....The cobra is on drag radials tho.