Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

LS1 hot cam tunning

Old 09-21-2003, 06:40 PM
  #1  
Teching In
Thread Starter
 
MedicManWS6's Avatar
 
Join Date: Jul 2003
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default LS1 hot cam tunning

one more question for everyone... I am looking at the LS1 hot cam, how is it on the stock PCM on a M6 car. Do you think the diablo predator can tune up the cam enough to get by????
Old 09-21-2003, 08:19 PM
  #2  
TECH Veteran
iTrader: (8)
 
ss rally red's Avatar
 
Join Date: Jan 2002
Location: Destin FL
Posts: 4,298
Likes: 0
Received 0 Likes on 0 Posts

Default Re: LS1 hot cam tunning

I have the hotcam and Predator tuning, the only drivability problem I have is on warm start ups it will hunt for a steady idle. I have not yet drilled the TB hole. I just did a little testing today and have my tuning set to +10% spark adv. & -2% on PE. My timing is at 37 deg. at WOT and my LT trims are 0 and ST trims are slightly negative,absolutly no KR. It pulls hard
Old 09-22-2003, 05:30 AM
  #3  
TECH Addict
iTrader: (5)
 
Redlinez's Avatar
 
Join Date: Jan 2003
Location: Fuquay-Varina, NC
Posts: 2,298
Received 0 Likes on 0 Posts

Default Re: LS1 hot cam tunning

I did fine when I had the hotcam with hpp3 or Superchips tuner. You'll be just fine.
Old 09-22-2003, 10:06 AM
  #4  
TECH Resident
 
TaTommyWS6's Avatar
 
Join Date: Nov 2002
Posts: 996
Likes: 0
Received 0 Likes on 0 Posts
Default Re: LS1 hot cam tunning

I had both cold and hot start issues before tuning it with LS1Edit. It is fine now.

BTW, I love my Hotcam...
Old 09-22-2003, 03:55 PM
  #5  
TECH Addict
iTrader: (1)
 
SSCamaro99_3's Avatar
 
Join Date: Jan 2003
Location: Ballwin, MO
Posts: 2,551
Likes: 0
Received 1 Like on 1 Post

Default Re: LS1 hot cam tunning

My Hotcam is still untuned. It starts the first time hot or cold. If it dies off after starting (ie-I kill it as it hunts for idle), it will take a couple of times to crank over. Other than that I love it. Sounds mean through the duals.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:23 AM.