Greekey

iTrader: (3)

So what do you guys plan on doing this winter mod wise?

1fast bird

iTrader: (22)

Putting in a boost ready ls2 402 with ported heads,victor jr. intake edelbrock elbow and throttle body.Mating that to a 4l80e with a manual valve body and adding a Midwest Chassis 9" narrowed 3" per side.All of this to handle the s480 turbo setup that I need to fab up. 8point s&w racecar cage and nice new Billet Specialties Street lites for track duties for my '98 Formula

IMgettingLS1

getting my cam installed

Black_Bird

iTrader: (6)

Selling.

hutch1999

cut-out and dr's

cgroh89

iTrader: (15)

Wheels And Brakes. Harness swap, misc other crap I just need to be motivated about

Spd-Kilz

iTrader: (35)

Accumulating parts to install in the spring.

TEA Stage II LS6 Heads
G5X3 Cam
Pushrods / Lifters / LS6 Oil Pump / 38# Injectors / UD Pulley / LS2 Timing Chain etc etc.

Also, if money permits, Fast 90/90

1995blacktattop

iTrader: (2)

i did the car cover mod....

Jersey Mike

iTrader: (9)

^ ^

1995blacktattop

iTrader: (2)

yeah i seem to do this in the fall now that i am living in an area that sees snow/salt

in the spring i will be doing the !car cover mod

MeangreenHD

iTrader: (6)

5.3 heads, cam, fixing the junk *** stock suspension (koni's if budget allows) Weiand warrior intake if i can get my hands on one. Driver mod practice!

LSXFORMULA99

iTrader: (12)

fast 90/NW 90mm, msd window switch, tubular lower control arms, brm sub frame conn., tune, billet specialties or weld pro stars.

mygto

I am still trying to decide if I am going to forge my stock motor or pick-up a stroker with heads.....

mygto

I did just pick up a nasty performance sumped fuel tank to do a return system.

TORCHD 02 TA

iTrader: (39)

42# injectors
85mm Lid
85mm MAF
DMH E-cutout