Fueling & Injection Fuel Pumps | Injectors | Rails | Regulators | Tanks

Aeromotive A1000 Q's

Thread Tools
 
Search this Thread
 
Old 11-24-2008, 09:32 PM
  #1  
Teching In
Thread Starter
 
slohatch's Avatar
 
Join Date: Nov 2008
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default Aeromotive A1000 Q's

A friend and I are building a 73' Nova with a 01 Vette LS1 and a T-56. i am not running EFI and have the Victor carb setup with a blow thru e-85 turbo setup. My questions are i am going to use the Aeromotive A-1000 setup and want to know what size -an line i need to run to be sufficient. I have been told anywhere from -6an to -10an and dont want to be insufficient. any help would be great and maybe some guidance towards a good shop to tune the car. Thanks ahead of time. Ryan
Old 11-25-2008, 01:36 PM
  #2  
Teching In
 
jstacy's Avatar
 
Join Date: Aug 2006
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Default

Go by the instructions that came with the pump.
Old 12-09-2008, 07:46 PM
  #3  
Teching In
iTrader: (5)
 
59rat's Avatar
 
Join Date: Dec 2008
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Default

A mim. of 10an feed & 10an return, and that's at low boost if you go higher boost the A1000 pump will not be enough. Rod




All times are GMT -5. The time now is 12:19 AM.