Generation III External Engine - Stainless Works Headers and 3-1/2" Exhaust System
09-23-2003, 06:29 PM
For those interested in what the setup looks like, there are pictures on my website at the bottom here:
Stainless Works 3-1/2" exhaust (http://junior.apk.net/~viper/pics.htm)
Sounds awesome - I'm running a non-baffled muffler so it's pretty much straight through. I'll try and get recordings up soon.
09-24-2003, 10:02 AM
A couple people emailed me:
Car is lowered with Eibach Pro's, and the exhaust has plenty of clearance. 3-1/2" is the maximum I think you can go over the axle when lowered. Due to the fact they use the factory hangars for the y-pipe, the y-pipe does not bang. I should be getting pictures of the actual headers as well so you can see those. They fit better than the FLP's did, and give plenty of room to change the oil and remove the drain plug ( very tight with FLP's ).
09-24-2003, 11:54 AM
MSRP of $699 for 304 stainless headers, WITH the 304 stainless y-pipe can't be beat... :D
I have a Corsa cat back on there now and want to go with headers.
Do I use the cats with these headers/y pipe and will it fit right up to the Corsa muffler?
Sorry-new to this game...
09-24-2003, 01:19 PM
Sponsor at the top of the page
vBulletin® v3.7.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO