View Full Version : Dipped into the 12's with my cammed LT1


street demon2k3
11-29-2008, 09:37 AM
Finally was able to make some shakedown passes with the car since I installed the new opti. I was able to get one solid run, and the other resulted in massive wheel spin and 2.6 60ft's :bang:. I've never driven a 6-speed so my times weren't bad for my 1st time bangin gears.

Mods:
cc306 + full bolt-ons and weight reduction on street tires.

1st pass:

launched at 1900rpm, bogged a little, hit the limiter in 2nd, and short shifted into 3rd. <-----Im a rook!!!

60ft...... 2.0
1/8th.... 8.37@88.5mph
1/4mi.... 12.7@114mph

Should pick up just a little more mph once I get the shifting down right, and some misc mods Im waiting on. Not too bad for a newb I think.

sweetbmxrider
11-29-2008, 09:56 AM
thats a good pass. sounds like you have plenty of room for improvement so good luck!

big dave
11-30-2008, 11:53 AM
Nice pass and with that mph you should run low 12s. More seat time and you'll get there. Good luck. How much weight reduction have you done?

street demon2k3
11-30-2008, 02:12 PM
Im hoping to pull similar times to yours, but I still have ways to go. Need to get a miss taken car of and a few more little mods. Weight reduction consists of removed:

frt/rear bumper supports (90lbs for both)
a/c and all components (100lbs I think)
all stereo equipment (20lbs for all speakers and head unit)
rear seats and seat belt accessories (25lbs?)
under carpet insulation (10lbs?)
BMR K-member (30lbs?)

Totals to about 275lbs of weight reduction from 3400lbs = 31xxlbs (estimated)