BigRich954RR

iTrader: (1)

Looking for good idle good driving manners power peaking around 6500.
thinking dur @.50 230int 240ex lift 600 600 115-116

looking for some ideas

if anybody has any video clips of a 427 cammed please link me to them.

ringram

Sounds like you need the stock cam
Or what about the GM torquer cam?

Gary98Z

iTrader: (9)

Have you checked out the EPP blower cam? 232/240 115 are the specs I think. It should have good drivability, especially with a 427.

1blownss

iTrader: (3)

I will try and find a vid on this cam for you , I know i have listened to several . It has a slight lope to it at idle but it does not shake the vehicle .
Speed Inc has the cam , it is there SC2 cam (224/232 .581/.595 114)

I have been looking for a cam to really compliment a MP122 or TVS2300 blower . They are seeing about 45-50 ft lbs of tq at the rear wheels on a stock 6.0 motor with a mp112 magnuson blower .
Pulls real hard at 2000 rpm all the way through 6400 rpm

Good luck !

JPH

iTrader: (2)

add a few more degress to the exhaust side and cut it on a 115 imo.