Dyno Guesses & Bench Racing Forum - Pullied cobra vs Bolt/Stalled LS1

View Full Version : Pullied cobra vs Bolt/Stalled LS1

12-03-2008, 11:15 PM
02 LS1 T/a, Full Boltons,3600 Stall vs a Pullied Cobra (450 rwhp)....


12-04-2008, 12:13 AM
I think either way he's gonna get you. Stay away from roll. If you can launch it well and he spins it'll help obviously, but he's gonna pull back as speeds increase.. Pullied cobra's don't mess around, good luck maybe he's a shit driver, never know!

12-04-2008, 07:52 AM
the terminators are really that quick just pullied?

12-04-2008, 07:53 AM
and when you mean full bolt ons , do you have cams too? (sorry new at this)

12-04-2008, 09:32 AM
Your mods are not going to cut it...slip a big cam in its your only hope, even then it will be close.

12-04-2008, 09:36 AM
I have a buddy witha pullied 04 and ran a 12.2 @ 119mph 450-460rwhp

12-04-2008, 10:22 AM
from any roll you are going to be ass raped

from a dig you have a chance to hold him off if they manage to botch the launch and you nail yours, but they will come around you..

12-04-2008, 10:28 AM
and when you mean full bolt ons , do you have cams too? (sorry new at this)

Its cam, we only have one. And no cam on the full-bolton's

When I called mine A full bolt on it had
LS6 Intake
After market Panhard
After Market Trq Arm
and Metco LCA's


you could add a few more things, electric water pump, pullies, ect..

12-04-2008, 10:32 AM
You definitely won't win w/ 2.73 rear.

12-04-2008, 09:19 PM
My car has LTs,ORY,LS6 Intake, Ported TB, Pullies coming soon lol,a Dyno tune,3600stall, and nittos. his car is jus a pulley with nittos. i think it will be a good race

the jester 812
12-05-2008, 12:15 AM
race him, lose, then get some gears, a cam, and a nice stealthy nitrous kit, and challenge him to a rematch

12-05-2008, 10:54 AM
I went 11.7@118 with a pulley only 03 cobra, so unless you've got a cam, i dont see you beating him