GatorFan08

iTrader: (1)

02 LS1 T/a, Full Boltons,3600 Stall vs a Pullied Cobra (450 rwhp)....

predictions?

lt1z28camaro

iTrader: (2)

I think either way he's gonna get you. Stay away from roll. If you can launch it well and he spins it'll help obviously, but he's gonna pull back as speeds increase.. Pullied cobra's don't mess around, good luck maybe he's a **** driver, never know!

v8venom

the terminators are really that quick just pullied?

v8venom

and when you mean full bolt ons , do you have cams too? (sorry new at this)

99_Z28

iTrader: (3)

Your mods are not going to cut it...slip a big cam in its your only hope, even then it will be close.

streetassasin

iTrader: (30)

I have a buddy witha pullied 04 and ran a 12.2 @ 119mph 450-460rwhp

slowmofo

iTrader: (6)

from any roll you are going to be *** raped

from a dig you have a chance to hold him off if they manage to botch the launch and you nail yours, but they will come around you..

slowmofo

iTrader: (6)

Its cam, we only have one. And no cam on the full-bolton's

When I called mine A full bolt on it had
LT's
ORY
Catback
Lid
LS6 Intake
Conveter
Gears
After market Panhard
After Market Trq Arm
and Metco LCA's



you could add a few more things, electric water pump, pullies, ect..

bene

iTrader: (16)

You definitely won't win w/ 2.73 rear.

GatorFan08

iTrader: (1)

My car has LTs,ORY,LS6 Intake, Ported TB, Pullies coming soon lol,a Dyno tune,3600stall, and nittos. his car is jus a pulley with nittos. i think it will be a good race

the jester 812

iTrader: (5)

race him, lose, then get some gears, a cam, and a nice stealthy nitrous kit, and challenge him to a rematch

Cobra2WS6

iTrader: (22)

I went 11.7@118 with a pulley only 03 cobra, so unless you've got a cam, i dont see you beating him