skyhighsami

iTrader: (8)

I need to know how thick these two gaskets are compressed and if they would work on a stock bore 6.0. I have search and found no compressed thickness info. Thanks

W8N2SQZ

iTrader: (6)

I thought they were .051 think. I don't remember exactly or if that was compressed, but it will give you a starting point. Yes you can run them on a 6.0. KP had great success with them before he sold his setup and I ran them at 14 psi without an issue.

Glenn

skyhighsami

iTrader: (8)

The stock 3 layer gaskets are .054 so wouldn't the 5 or 6 layer gaskets be thicker? Unless the layers themselves are thinner