Generation IV External Engine - LS7 crankcase ventalation

At my work we are installing a LS7 into a GTM kitcar. We are using Peterson Fluid system tanks. Right now we have a 1.5 Gallon Oil tank, and a remote breather tank. I know the routing for the actual oiling system and all of that is connected using -12 AN lines. The very top of the oil tank has a -12 AN fitting in it that is for ventilation I think. On the breather tank there is one -12 AN fitting and two -6 AN fittings.

I know the -12 on the breather tank hooks up to the very top of the oil tank. What I am having a problem finding is how to hook up the two -6 lines.
There is a valley ventilation tube, and two tubes coming off of the rocker covers. How do these all tie together to the breather tank?

Thanks for the help anyone can give me.

well, after further searching i figured it out off another website. They say its a better way to keep oil out of the intake. If anyone wants to know i will post a picture and description.

well, after further searching i figured it out off another website. They say its a better way to keep oil out of the intake. If anyone wants to know i will post a picture and description.

I would like pics of this please. neal