lsxlowtech

iTrader: (32)

Is there any one that sells a turbo(size) and tune for a 6.0l with a BS-3 and truck manifolds? I would like to make 1000hp. I am not looking for HOT ROD horse power! This is a drag car and it has to run a #. thanks JC

HUNTER02SS

iTrader: (24)

Well, not to sound like a azz, but obviously you havn't done any research yet!
Look to the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>, and you can answere all your own questions. Also look in the stickies above! It's all there.

lsxlowtech

iTrader: (32)

This is not going in to a f-body. I am not looking for a kit. Looking for a turbo size and a tune that has been proven to work. I can do the fab. work. I need inj. size, t/b size, exhaust ect..... thanks JC

frcefed98

iTrader: (16)

6.0L go with a 80mm on up for 1k
BS3 tune, go to BS3 and search for listed tuners, and that'll take care of that.
injector size, at least 96lb'ers
TB size, stock should work but going bigger will not hurt things
exhaust 4 inch on up
etc....