what do you think? 346 h/c 441RWHP 412ftlbs
#1
Launching!
Thread Starter
Join Date: Mar 2007
Location: lynchburg, VA
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
what do you think? 346 h/c 441RWHP 412ftlbs
got my tune done today by PCM 4 less in mooresville NC. they did an awsome job. car runs great. it pulls like crazy now and has a awsome sound. my numbers are 441hp @ 6400 and 412ft @ 5600. seemed like strong numbers from a stock cube heads cam car but i may be wrong is this typical results my mods are listed bellow. cam is a TSP 233/239 .598/603 on a 112 and the heads are PRC stage 2.5 5.3 heads
#2
TECH Addict
iTrader: (35)
Join Date: Dec 2005
Location: Cherry Hill, NJ
Posts: 2,373
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, that's good torque.Throw on a Fast and you should be 460+rwhp. My buddy put down about 440rwhp and 400rwtq with a 230 cam and the same heads. So you're right where you should be.
Trending Topics
#8
TECH Enthusiast
Join Date: Apr 2007
Location: Charlotte, NC
Posts: 629
Likes: 0
Received 0 Likes
on
0 Posts
strong numbers, my car made 440rwhp and 400rwtq on his dyno and my car has ran multiple 7.0's@99-100 at Mooresville in 70+ degrees.
Going to Rockingham tomorrow to get some numbers in the 1/4 in cooler temps. My setup is PRC 5.3 heads, 230/236 cam, fast 90/90 etc etc.
Going to Rockingham tomorrow to get some numbers in the 1/4 in cooler temps. My setup is PRC 5.3 heads, 230/236 cam, fast 90/90 etc etc.