Painless Performance needs test vehicles
12-16-2008, 09:51 AM
#1
FormerVendor
Thread Starter
Join Date: Jun 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Painless Performance needs test vehicles Painless Performance needs test vehicles
Painless Performance Products is continuously in the process of developing new products. We strive to ensure our product fits, right out of the box, so we have a continuing need for test vehicles.
For our customers in North Texas this could present an opportunity to receive new products with free installation and enables them to be involved with the development of new products. See our current list (below) of vehicles we need for ongoing development. Our need could be something as simple as a test fit, where we would only need the vehicle for a day or so. Or it could involve more extensive testing. All vehicles are stored within our secure warehouse.
Conditions vary for each vehicle listing. 60608 Chassis/LS1 w/4L60E integrated harness insta Year/sPre-1986 MakeGM Apply ModelAny EngineLS1/LS6 Trany4L60E Additional InfoWe are looking for a vehicle with a LS1/4L60E transplant that needs an entire vehicle rewire. The vehicle must be pre-1987 and we would prefer a GM truck or blazer. Full size GM cars may also be acceptable. The vehicle must be available local to us or you are willing to ship it to us for the install. Expect the install to tie up your vehicle here at Painless for atleast 1 month and possible up to 3 months.
you can go to www.painlessperformance.com click on "test vehicles" and apply. you can also contact Mike Abbott at Painless P"erformance via email mabbott@painlessperformance.com
Painless Performance Products is continuously in the process of developing new products. We strive to ensure our product fits, right out of the box, so we have a continuing need for test vehicles.
For our customers in North Texas this could present an opportunity to receive new products with free installation and enables them to be involved with the development of new products. See our current list (below) of vehicles we need for ongoing development. Our need could be something as simple as a test fit, where we would only need the vehicle for a day or so. Or it could involve more extensive testing. All vehicles are stored within our secure warehouse.
Conditions vary for each vehicle listing. 60608 Chassis/LS1 w/4L60E integrated harness insta Year/sPre-1986 MakeGM Apply ModelAny EngineLS1/LS6 Trany4L60E Additional InfoWe are looking for a vehicle with a LS1/4L60E transplant that needs an entire vehicle rewire. The vehicle must be pre-1987 and we would prefer a GM truck or blazer. Full size GM cars may also be acceptable. The vehicle must be available local to us or you are willing to ship it to us for the install. Expect the install to tie up your vehicle here at Painless for atleast 1 month and possible up to 3 months.
you can go to www.painlessperformance.com click on "test vehicles" and apply. you can also contact Mike Abbott at Painless P"erformance via email mabbott@painlessperformance.com
12-17-2008, 09:25 AM
#7
FormerVendor
Thread Starter
Join Date: Jun 2006
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys; if y'all have a car you think may qualify for the program just email mabbott@painlessperformace.com or go to www.painlessperformance.com and apply under test vehicles. Mike Aboott is the engineer who heads this project.
