96 ta-ws6
12-16-2008, 10:02 PM
#1
Teching In
Thread Starter
Join Date: Dec 2008
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
96 ta-ws6 Need Help, friends car. Car starts, runs good then right when it seems to go into closed loop it kills and won't start for an hour or 2. Changes made are:
Cranksensor; maf; opti spark; coil w/ module;plugs; wires;both cats;02's about a year ago. Most of these parts have been changed twice. Computer keeps throwing codes after parts are changed and computer has been cleared, any help sure would be appreciated. TIA.
Cranksensor; maf; opti spark; coil w/ module;plugs; wires;both cats;02's about a year ago. Most of these parts have been changed twice. Computer keeps throwing codes after parts are changed and computer has been cleared, any help sure would be appreciated. TIA.
12-17-2008, 09:19 AM
#5
Teching In
Thread Starter
Join Date: Dec 2008
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
96 lt1 ws6 The codes were for everything that has been changed, the original post. But even after the parts were change, 2 opti sparks and 2 coil / modules, the codes cleared, the same codes keep appearing. The EGR was also changed. Could the computer be bad.
