Juicemonkey

iTrader: (3)

Anyone running a carb style intake on their LS1 orLQ9 with and elbow? I know there are some low profile versions of it. I am just curious as the height of the intake and the elbow installed and how much higher it is compared the stock LS1 intake. Thanks guys.

Fireball

iTrader: (21)

I run a vic jr and std elbow...it sits above the cowl and you need a taller hood

98transguy

iTrader: (7)

i run a vic jr. with an elbow from intake elbows and it will fit under a ws6 hood with minor trimming however,the cowl needed trim to fit my intake

99Z28LS1

iTrader: (4)

where'd you get the elbow? If i may ask

98transguy

iTrader: (7)

left u a pm

DanZ28

iTrader: (5)

I run the same elbow.

EPP

iTrader: (22)

Same elbow on mine as well. Bob

GT-GO

Do these elbows fit under a GTO hood?

ls1290

iTrader: (20)

Vic Jr on my 402 with the Intake Elbows elbow. No cowl mod on a C5, but a high rise hood is required.

veee8

iTrader: (40)

Same elbow here, in the 78mm version, with a 78 mm FAST TB.

BlazinT/A

iTrader: (10)

do you guys have to notch the bottom of your stock hoods to get them to fit?

Rickys S/C Z28

iTrader: (13)

mine fits but it rubs so im going to cut it a bit

ZLEEPER

iTrader: (24)

Here's a couple pics of my car with a carbstyle intake and Edelbrock intake elbow. Looks as if it should clear a stock hood just fine. No cutting of cowl needed so far...
Big thanks to Mike and Steve up at ICON who are doing the work on my
408 F1a build.

http://i162.photobucket.com/albums/t...620cb5e422.jpg

http://i162.photobucket.com/albums/t...c407e29ef9.jpg

http://i162.photobucket.com/albums/t...b63198807a.jpg

http://i162.photobucket.com/albums/t...0aac98e003.jpg

http://i162.photobucket.com/albums/t...b2a1c16b1c.jpg

http://i162.photobucket.com/albums/t...9ed433dedb.jpg
Hope the links work.

Silver_TransAm

iTrader: (2)

I ordered the edelbrock elbow since it is supposed to fit without modifications to the hood or cowl.

Juicemonkey

iTrader: (3)

wow thanks guys, the pictures are great that is just what i was looking for. Im doing a turbo setup to, you guys hit the nail on the head. Thanks

veee8

iTrader: (40)

Yes, Just on the bottom side, you never see it from the outside.

jfg455

iTrader: (5)

F body elbow from intake elbows with a GMPP single plane intake will fit under a 3rd gen firebird hood. Bueatiful craftmanship as well. It was $225. G

Frank02L

iTrader: (1)

Yeah the previous mentioned mfg has some nice fab'd valve covers as well!

EPP

iTrader: (22)

Yes they do, although it's hard to see in this pic. Here is a link to this GTO. http://www.exoticperformanceplus.com...Car.php?car=11 Bob

Sluggish

iTrader: (10)

What intake is that?



Would there be an advantage switching from a 90mm FAST to a carb style?