F3RR3T

Im looking for pictures that show how the rear bars interfere with rear passengers "how close there head is etc"

chrysler kid

iTrader: (14)

here

JDP

iTrader: (21)

there are a lot of different setups for the rear bars, do a search, there are quite a few threads on pics of cages

Big Bird WS6

iTrader: (9)

i like the flats. but i dont want to cut plastic

F3RR3T

is that wolferacing's cage?

and thanks for the pics that's exactly what i was looking for. it looks like a real head knocker for passengers.

guess i could put all the ricers back there an knock some sense into them

Big Bird WS6

iTrader: (9)

is there really a point for a 4 point system?

MeangreenHD

iTrader: (6)

your putting any kind of cage or roll bar in your car and your worried about passenger space?????? the back seat are insurance decoration anyways

MattIROC

iTrader: (19)

Go with a 6pt unless you plan to go faster than 10.0

(the pics chrysler kid posted looks like a 6pt)

F3RR3T

i planned on a wolfe 6point. but im going to have takash racecraft in Orlando do a cage that will hug the interior panels. (personal friend of my fathers)

also something ive been wondering. when welding the cage the bars that hug the roof of the car, how do you weld the top of the joint since there so close to the roof?

F3RR3T

not worried about it. would just like to salvage them as much room as i can

chrysler kid

iTrader: (14)

it was a wolfe 5 point for my daily driver. when your in the back seat the side of your head pretty much rests on the inside of the back roll bar, any hard dips or bumps are bruisers

'Trust'

iTrader: (24)

Here's mine:







Wolfe 6 point.

F3RR3T

i see you have a removable cross bar. ever pass tech at the strip?

F3RR3T

'Trust'

iTrader: (24)

They have never said anything about it. I know it's not legal, but no track I've ever been to will be that strict unless it's an event.

F3RR3T

thats cool if needed i can always weld it in. everytime ive been to the track its been with my friend and they bring a tig welder.

official "that has to be welded not bolted"
ME "really ill be right back "

'Trust'

iTrader: (24)

Haha, talk about coming prepared!

F3RR3T

ive never actually got to drag at the track before only on a private airstrip in my mom's old neighborhood. it was pretty nice till i hit a landing light and killed a rim.

im hoping to go drag in orlando in march

F3RR3T

im trying to figure out how yall painted your cages.

paint all the tubes first (except where welds will be) then weld in car and touch up the unpainted joints

Mike@HSW

iTrader: (6)

you can just get a bolt in style like this that is already powder coated.





Just ditch the back seat. I orginally installed mine with the stock seats in there. Later on i was just like, uhhhh why did i do that