CalSpeedPerformance

iTrader: (64)

Ive been wanting to run a 3/8 pushrod with the stock size ends on each end over the 5/16" moly pushrods...ive always thought run the biggest pushrod you can get the better.

Anyone know whos making any like this for a reasonable price for a 7.400"?

Stang's Bane

iTrader: (22)

Why would you want to neck them down??

vettenuts

iTrader: (4)

Trend makes a double tapered pushrod, have you contacted them? I believe Terry Manton does as well. I would be curious if they fit in an unmodified head (one not machined for larger diameter pushrods).

Juiced

iTrader: (2)

double tapers are big $$$$ my 3/8-11/32 .095 wall pushrods where 525 for the set

5.3LJimmy

iTrader: (10)

here you go: http://store.summitracing.com/partde...6&autoview=sku

vettenuts

iTrader: (4)

What is your setup? Did you have to machine the heads for fitment?

CalSpeedPerformance

iTrader: (64)

Thats exactly what im looking for... Thanks for the link. $170, not bad.

I need to order a set and see if I can make them work. I can have my local machine shop open the pushrod holes up if needed.