SFC for a vert
#1
TECH Enthusiast
Thread Starter
Join Date: Aug 2005
Location: crossett, Arkansas
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
SFC for a vert
hey who here has a convertible and the TSP true dual exhaust setup and has knowledge of which sub frame connectors will work and which sponsors here sale it?
#2
LS1TECH Sponsor
iTrader: (41)
Weld-in: http://www.stranoparts.com/partdetai...D=22&ModelID=7
Bolt-in: http://www.stranoparts.com/partdetai...D=22&ModelID=7
As you cand see in the "bolt-in" picture take with them on a car, they run along the front rails only, no where near any exhaust that isn't really, really strange....
Bolt-in: http://www.stranoparts.com/partdetai...D=22&ModelID=7
As you cand see in the "bolt-in" picture take with them on a car, they run along the front rails only, no where near any exhaust that isn't really, really strange....
__________________
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
#3
LS1Tech Premium Sponsor
iTrader: (5)
Hello we offer a set that are weld in and are made from 1 5/8" tubing with 1/4" plates. They are available in red or black hammertone.
http://www.bmrfabrication.com/F4.htm
http://www.bmrfabrication.com/F4.htm