trickflow 235 6 bolt head questions and can anyone posts a few pics of it
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: NJ
Posts: 1,193
Likes: 0
Received 0 Likes
on
0 Posts
trickflow 235 6 bolt head questions and can anyone posts a few pics of it
Looking for as many different angle pics of the trickflow 6 bolt 235 heads.
Is there any room for hand porting of these heads to make them flow better or pretty much as good as they come ?
How thick is the deck one these?
Are the valve cover rails raised?
Any body with flow numbers from 650 700 lift ?
Is there any room for hand porting of these heads to make them flow better or pretty much as good as they come ?
How thick is the deck one these?
Are the valve cover rails raised?
Any body with flow numbers from 650 700 lift ?
#2
FormerVendor
iTrader: (13)
We sell a 245 with a 2.10" intake valve that is a step up from the 235, but don't bother hand porting either, there is basically nothing to be gained and lots can be lost. The chambers and exhaust ports can be sanded, but anything more than sanding the intake could cause you problems. We haven't seen any power gains with hand work. Here are some pics of unported bare castings.
#3
FormerVendor
iTrader: (64)
Join Date: Feb 2008
Location: Bakersfield, CA
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
Looking for as many different angle pics of the trickflow 6 bolt 235 heads.
Is there any room for hand porting of these heads to make them flow better or pretty much as good as they come ?
How thick is the deck one these?
Are the valve cover rails raised?
Any body with flow numbers from 650 700 lift ?
Is there any room for hand porting of these heads to make them flow better or pretty much as good as they come ?
How thick is the deck one these?
Are the valve cover rails raised?
Any body with flow numbers from 650 700 lift ?