Stock MAF size
#1
Staging Lane
Thread Starter
iTrader: (6)
Join Date: Dec 2008
Location: Elizabethtown, PA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Stock MAF size
Ok, I posted this on ls1.com as well, but no replies there, so I'll try here. I looked at the stickies on the top, but nothing on MAF sizes. Does anyone know what the stock size is on a '95? I know it's something mostly everybody knows... except me, so please help me out here!
#3
Staging Lane
Thread Starter
iTrader: (6)
Join Date: Dec 2008
Location: Elizabethtown, PA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
So what is 3.5" converted into millimeters? That's what they go by right??? I especially want to know if it is the same as the ls1's... But, yes, like you said I fully intend on sticking w/the stock maf, I hear they're nothing but trouble when they get changed out. I have a '95 MAF/computer setup, but yes, it's hooked up to a '93 engine if that makes sense.
#5
Staging Lane
Thread Starter
iTrader: (6)
Join Date: Dec 2008
Location: Elizabethtown, PA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Fair enough, I think that's what I need to know! The reason is that I have a '95 lt1 setup as you know, but it has the chassis parts, and ram air setup of a 98+, so I need to know if I buy an aftermarket lid for an ls1, that it will fit up to my stock maf... I don't feel like making a $100+ mistake, know what I mean?
Trending Topics
#8
Staging Lane
Thread Starter
iTrader: (6)
Join Date: Dec 2008
Location: Elizabethtown, PA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
So... what you're saying is that I will need some kind of a sleeve to get it to go from the ls1 lid to my stock MAF, correct? Sometimes you have to dumb it down for me a little, lol.