crf538

iTrader: (3)

i just got a 4l80e and im going to get my local trans guy to go through it for me, what should i get him to upgrade while he is in there?
its going in a turbo car thats about 700fwhp i would estimate and im thing about getting that trinity trans brake for him to install while he's in there

thanks for any input.

WE TODD DID

iTrader: (2)

He is the transmission guy, I would think he should tell you what you need??

Randy WS6

iTrader: (69)

What year is it ? It on the yellow tag.

tptransmission

Let me know what we can do to help! I can make your 4l80 perform better than anyone else.

crf538

iTrader: (3)

sending pm

Randy WS6

iTrader: (69)

You cant beat that

nahasapeemapetalon

iTrader: (9)

I highly recommend the Stage II transgo shift kit. 100% better.

twinturbo496

iTrader: (2)

I recommend you cut the wings off the case, I just pulled out my TH400 with wings, and had to remove one header, the 4L80E with the wings removed went in much easier, and next time it will come out without removing the header.

forcd ind

iTrader: (7)

depending on what your going to do, there are some basic things i have found
larger front stator bushing, anti walk rear bushing, 5 clutches in direct drum, some pump work with new valving, some work on the valvebody, the transgo shift kit does that-a lot depends on the year case

crf538

iTrader: (3)

i didnt see a yellow tag, only a blue rebuild tag that i didnt see a date on, but it came out of like a 94 truck so i assume it is the older model, i read that the newer ones were better but i got this one for $100 so i figured it was worth a shot

thanks for all the info, i mainly just want to bring up all this to my trans guy just to make sure


on another note, is anyone running the trinity trans brake with the automatic valve body, looks like a good deal i just wanted to talk to someone that was running one

thanks