Sponsor Group Purchases - Group purchase on Moser and Strange Rearends..

We ran a group purchase on strange rears in the past and had good success with that. We would now like to take it a step further and include Moser in this one. The GP discount will be good for free shipping (up to $175 value on some units) plus up to $250 off the regular price.

The GP is good for all complete Moser 9" and 12 bolt rears along with the Strange 12 bolt and Strange S60 rears.

Let me know the options you're looking for and I'll quote you a price for your application. I'm only asking for 4 orders to make this GP happen. Thank you.

I have a couple people ready to go from another forum so it looks like there's a real good chance this GP will be a go. Get in on it and don't miss out on the savings.

Im all over this one.

Any chance you could include bare Moser housing/axle packages with this GP? If so, what would be the pricing? You can PM me if you'd rather do that.

Mike

i have 2100 to play with talk to me

i have 2100 to play with talk to me

What would you like to talk about? What are you looking for?

moser 9 is what i would really like

I would like a price on a 9", 3 channel ABS, Detroit TruTrac, 31 Spline axles, drain plug, bare metal finish, Shipped to 87110. Please send the price with both Aluminium and Nodular case. Thanks Ryan.....

I'm intertested in everything inside a rear end. I have the housing already.

I'm intertested in everything inside a rear end. I have the housing already.

What housing do you have?????

8.5 10 bolt.

12 Bolt here, 4Channel, 3.73 gear, 33spline tru trac, its a 4thgen

Also would like a price for a 9in with the same set up

shipped to 30736

moser 9inch housing with 35 spline axles

Moser 9", 31 spline, True-Trac, 4-channel, 3.70 gears, unpainted and do both ways aluminum and iron. You can PM me.

Shipping is 21901 zip

moser 9", 31 spline, Tru Trac, 3 channel, 3.90 gears no backbrace, nodular case, unpainted to 38654. Please PM me.

Still waiting for a price.....

Was thinking 9", but just purchased a UMI Torque Arm so I believe I can only use a 12 bolt in order to keep the current setup.

So 12 bolt, 33 spline, 4.10's, Tru Trac, 4 channel, with backing plates, LCA brackets for a 4th gen with ABS/TCS. Shipped to 85374

Thanks

Pm Sent...

I'm going to need payment from everyone who's interested by wednesday so I can get the orders placed this week.

Please pm me final price quote on:

strange 60\truetrac\4 channel abs\410 gears\I'll send in brake plates\metric studs

pretty much the standard setup.

thanks,

price on Moser 9", 31 spline, True-Trac, 3-channel, 3.50 gears, unpainted alum & iron prices please. Also I will need stock position LCA and swaybar attachments.

Also let me know how much a new driveshaft to fit would be from you. Thank you.

wait a sec, you can do 3channel with a 9" and still have abs? Where is the pickup wheel for the speed sensor? if so

9", 4.10, 3 channel ABS, Detroit TruTrac, 31 Spline axles, drain plug, bare metal finish

and either way quote for a 12bolt with 33spline axles and same setup as above 9"

shipped to 96706

I could use a quote on a 12 bolt with 3.90 gears, Truetrac, no ABS provisons.

Thanks.

What's going on with this GP?

Quote me for a 4th gen 9'' w/ tq arm mount = 35 spline, 3.25 gears, steel spool, no abs or traction control.

how come no price? , why all the secret pm'ing.

MAP Guidelines... cannot advertise lower than MAP.. :)

MAP Guidelines... cannot advertise lower than MAP.. :)

oooohhh ok i understand now.

Sorry for the delayed responses, a stomach virus had me out last week but I think I'm caught up with everyone. As of right now there's been a lot of interest in this GP but only 1 commitment so we need a few more to get this going.

pm sent a couple days ago...........any news?

im extremely interested on this! this is what i was planning to use my tax money for anyways! pm sent!

Get what you want together in a PM, and send it to him.. :)

PM'd :thumb:

Moser 9", 31 spline, True-Trac, 4-channel, 3.70 gears?

Just want a drop in 12 bolt with 4.10's for a 98 T/A. Like the Moser rears, got a Moser 60 for my 71 Cuda.

Then again who ever has the cheapest 12 bolt is who I will go with.

Still waiting on a response...would like to know the dif in cost between Moser and Strange with the same options. 33 spline, non spool, OE wheel studs, standard length, etc. Want a drop assembly for my 98 TA that my brakes will work on. Thanks in advance.

We didnt' forget about ya.. Just been swamped w/ 4 engine builds at the same time.. we'll contact ya in the a.m. thx for your patience..

No problem.

Moser 9", 31 spline, Tru-Trac, 4-channel, 4.11 gears, stock width, nodular vs. alum, anything else i might be forgetting?...let me know!

Thanks

-Karl

same for me please Moser 9", 31 spline, Tru-Trac, 4-channel, 3.73 gears, stock width, nodular vs. alum, anything else i might be forgetting?...let me know!



Gary

you have a PM

I could use a moser 12 bolt with a true trac, 3.73s and I'm not sure if a 98' takes a 3 channel or 4.

PM's sent

Looking for a 9 inch trutrac 3.89 gears largest axles that the trutrac allows. price both aluminum and nodular and both with 4 channel abs/tcs and without 4 channel abs/tcs.

How much for the strange S60 with 4:10 gears and trutrac?

How much for the strange S60 with 4:10 gears and trutrac?

Do you need abs? What year is this for?

I'll be ending this special on friday the 27th for anyone else who may be interested. Thanks to those who've already made their purchases.

any word on my PM?

how much for a moser 12 bolt with tru trac and 373 gear for a 1998 camaro ss

Looking for the Strange 12 bolt with 4.10, upgraded cover , no abs and I will pick up the rear from Strange

I am also considering the Dana s60, same options, upgrade to the detroit locker and I also want the U1702 drive shaft as well as the U1662 Transmission yoke

can i get a price on a 4 channel Moser / Strange 9", 3.70 gear, spool and locker prices? Thanks

2000 TA M6
Will a UMI tunnel mounted torque arm work with a Moser 9"?? FMI

Moser 12 Bolt Detroit TrueTrac, Fbody w/ torque arm mount, 3.73 or 4.10 gear ratio, 33 Spline Axles, 1350 yoke. ABS/TCS 3 or 4 channel

pm me quote

Moser 9" spool 35 spline tq arm mount stock brakes 4.56s no ABS 1350 yoke

this special ended like 8 months ago

I've started another GP thread:
http://www.ls1tech.com/forums/sponsor-group-purchases/1186370-moser-strange-rear-end-gp.html

I PM'd you two guys that posted in here today.